Reflective road studs / NK-1001

Plastic Reflective Road Stud

NK-1001

Housing
PC / ABS housing
Body size
100 × 100 × 18 mm
Load capacity
15 t
Get Free Quote

Confirm the exact configuration, technical documentation and order terms with our team.

Product Overview

The NK-1001 is a plastic reflective road stud designed for economical road marking and traffic guidance applications. It features a PC/ABS housing, a PMMA reflective lens, and an epoxy and quartz sand filling structure. The reflective lens returns vehicle headlight illumination toward drivers, helping identify road edges and lane boundaries at night.

With dimensions of 100 × 100 × 18 mm, the NK-1001 features a special groove design intended to improve reflectivity and compression resistance. Its adhesive-friendly base and straightforward installation make it suitable for projects involving factories, hospitals, schools, parking areas, and other roads with relatively moderate traffic conditions.

  • PC/ABS Housing: Designed for practical outdoor road marking applications.
  • PMMA Reflective Lens: Provides retroreflective road guidance.
  • Special Groove Design: Developed to improve reflective performance and compression resistance.
  • Easy Installation: Features an adhesive-friendly base and a compact square design.
NK-1001 product overview

Technical Specifications

ParameterSpecification
Body materialPC/ABS
Reflective materialPMMA
Size100*100*18mm (3.94"*3.94"*0.71")
FillingEpoxy+Quartz Sand
Lens MaterialPMMA
ColorRed, Yellow, Green, Blue, White
Packing100pcs/carton Carton size 56*22.5*22.2cm (22.05"*8.86"*8.74")
Load capacity15Ton

Product Features

ASTM D4280 & EN1463-1 standard

Canada DBM mold insert and Taiwan PMMA make a lens with highest reflectivity

Highest reflectivity-fade resistance

Special groove design to improve reflectivity and compression resistance

Lowest cost, good adhesive ability, easy to install makes it popular on global market

Installation Guide

Raised models start with position marking. Confirm any anchoring-shank requirements before installation. The photographs illustrate the installation workflow.

Illustrative installation workflow: Surface Preparation
01

Surface Preparation

Check the pavement condition and prepare the installation area.

Illustrative installation workflow: Position Marking
02

Position Marking

Mark the installation positions. For an anchoring shank, confirm the required anchor hole against the installation drawing.

Illustrative installation workflow: Product Installation
03

Product Installation

Position and secure the road stud using the specified installation method.

Illustrative installation workflow: Final Inspection
04

Final Inspection

Check alignment, fixing, sealing and reflector condition.

What does
your project need?

Share the road conditions, target model and quantity. Start a clear specification discussion with NOKIN.