Solar road studs / NK-RS-A7

Embedded Solar Road Stud

NK-RS-A7

Housing
PC
Body size
Ø112 × 56 mm
Load capacity
>20 t
Get Free Quote

Confirm the exact configuration, technical documentation and order terms with our team.

Product Overview

The NK-RS-A7 is an embedded solar road stud designed for road construction and lane marking applications. It uses a Japanese-brand PC housing, with tempered glass also available as an alternative material option. Its integrated solar panel and rechargeable battery power the LED lighting system, helping delineate road lanes and provide visual guidance during nighttime conditions.

Measuring Ø108 × 56 mm, the NK-RS-A7 features an embedded installation structure and a stated load capacity exceeding 20 tons. The combination of material options and embedded construction makes it suitable for projects requiring a recessed-style solar road marker.

  • Embedded Construction: Designed for installation into prepared pavement openings.
  • Material Options: Available in PC or tempered glass configurations.
  • Load Capacity: Designed for loads exceeding 20 tons.
  • Flexible Battery Options: Supports NI-MH or lithium battery configurations.
NK-RS-A7 product overview

Technical Specifications

ParameterSpecification
Body materialJapan Brand PC
BatteryNI-MH1.2V/600MAH(high temperature resistance, made in China) Lithium battery3.2V/500MAH(made in Japan)
Sizeφ112*56mm (φ4.41*2.20")
Load capacity>20T
Power supplyUSA Brand High Efficient Solar Panel Solar panel(Monocrystalline 2.5V /0.25W)
LEDUltra bright diameter 5mm*6pcs
Flashing modeBlinking or constant(flashing frequency 2Hz, also can be made according to your requirements) Working hours Blinking: 140h for NI-MH battery; 130h for Lithium battery; 30h for super capacitor after fully charged. Constant: 40h for NI-MH battery; 35h for Lithium battery; 15h for super capacitor after fully charged.
Water proofIP68
Visual distance>800m
Life span2years for NI-MH battery; 5years for Lithium battery;
Working temperature-40~85 °C
Package1pcs/box; 30pcs/ctn; Weight: 13.5kgs; Carton size: 60*34.5*21.5cm (1pcs/box; 30pcs/ctn; Weight: 29.76bs; Carton size: 23.62"*13.58"*8.46")
LED ColorWhite, Blue, Yellow, Red, Green
Working ModeFlashing or constant

Product Features

1. No UV or IR in the spectrum

2. Energy-saving, Environment friendly, and only 20% power consumption of halogen lamp and incandescent lamp.

3. Tempered crystal glass for super resistance.

4. Particularly designed constant current driver for open or short circuit protection

Where Can It Be Used?

Glass LED Road Studs in New Zealand NOKIN solar road stud NK-RS-D1 in Austria NOKIN Solar Powered Road Stud in Saudi Arabia Solar LED Road Studs Appeared in Urban Road of South Africa

NK-RS-A7 application — Mexico
NK-RS-A7 application Mexico
NK-RS-A7 application — Mexico
NK-RS-A7 application Mexico
NK-RS-A7 application — Mexico
NK-RS-A7 application Mexico
NK-RS-A7 application — Thailand
NK-RS-A7 application Thailand
NK-RS-A7 application — Thailand
NK-RS-A7 application Thailand
NK-RS-A7 application — Thailand
NK-RS-A7 application Thailand

Installation Guide

Raised models start with position marking. Confirm any anchoring-shank requirements before installation. The photographs illustrate the installation workflow.

Illustrative installation workflow: Surface Preparation
01

Surface Preparation

Check the pavement condition and prepare the installation area.

Illustrative installation workflow: Position Marking
02

Position Marking

Mark the installation positions. For an anchoring shank, confirm the required anchor hole against the installation drawing.

Illustrative installation workflow: Product Installation
03

Product Installation

Position and secure the road stud using the specified installation method.

Illustrative installation workflow: Final Inspection
04

Final Inspection

Check alignment, fixing, sealing and lighting performance.

What does
your project need?

Share the road conditions, target model and quantity. Start a clear specification discussion with NOKIN.